Skip to content

3M Scotch-Weld Structural Adhesive 7260 B/A FC (Fast Cure) 400ml

by 3M
Save 13%
Original price $98.00
Current price $85.00
3M Scotch-Weld Structural Adhesive 7260 B/A FC (Fast Cure) 400ml
 
3M™ Scotch-Weld™ Structural Plastic Adhesive 7260 B/A exhibits high strength even at high temperatures and good aging resistance. Even with minimal preparation Scotch-Weld 7260 B/A two component structural adhesive ahcieves outstanding adhesion to metals and adheres well to many other surfaces. It also is fast setting with a working time of only 90 minutes . This time can be shortened with heating. 
Applications;
- Mounting and Trim attachment
- Panel to Frame/Stiffner to Panel Assembly
- Small Joint assembly

Substrate 1 Ceramic
Glass
Metal (Unpainted)
Paint
Paints (Powder Coat, Painted Metal, Composite Panel)
Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon)
Stone
Substrate 2 Ceramic
Glass
Metal (Unpainted)
Paint
Paints (Powder Coat, Painted Metal, Composite Panel)
Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon)
Stone


Directions for Use:
Important: Use only the specified 3M™ EPX™ Manual Applicator

1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants. 
2) Place 400ml duo-pak cartridge in EPX Manual Applicator applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only  gold mixing nozzle 127mm  by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.

* Note: 7260 B/A 400ml Adhesive require 3M EPX Manual 400ml Applicator, and EPX Square Gold Mixing Nozzle 127mm for proper use *

3M Stock #: 7000033763
UPC Code:  53134375434558
3M Catalogue #:  7260B/A FC-400ML