3M Scotch-Weld DP125 Epoxy Adhesive Grey 48.5 mL
by 3M
Save 15%
Original price
$45.99
Current price
$38.90
3M Scotch-Weld™ Epoxy Adhesive, DP125, grey, 1.71 fl. oz
The 3M™ Scotch-Weld Epoxy Adhesive DP125 is a low odour, two-part epoxy adhesive that creates strong structural and flexible bonds on metal, ceramics, wood, and many plastics. It provides the reliability and strength you need to maintain productive, cost-effective result. Offers a 25-minute work life, allowing for adjustments before curing. It creates bonds with high peel and shear strength, flexible enough to accommodate thermal expansion or vibration.
Features
- Maintains a strong bond under expansion, contraction, and limited movement
- Medium viscosity helps minimize running, dripping, or migration
- 25-minute work life with handling strength in approximately 150 minutes at room temperature
- Flows smoothly for controlled dispensing where needed
Directions for Use:
Important: Use only the specified 3M™ EPX™ Plus II Applicator system.
1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants.
2) Place duo-pak cartridge in EPX applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only 1:1 mixing nozzle by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.
Note:
-**DP 100 Adhesive requires 3M EPX Plus II Applicator for proper use**