Skip to content
3M DP460 Scotch-Weld Structural Adhesive 50ml Off-White
3M DP460 Scotch-Weld Structural Adhesive 50ml Off-White

3M DP460 Scotch-Weld Structural Adhesive 50ml Off-White

by 3M
Save 17%
$57.99
$47.89
3M DP460 Scotch-Weld Structural Adhesive 50ml Off-White

3M Scotch-Weld Epoxy Adhesive DP 460 Off-White is a high performance, two-part epoxy adhesive offering outstanding shear and peel adhesive, and very high levels of durability. Great for bonding a variety of materials such as metals, ceramics, wood, and plastics. Bond aluminum to carbon fiber. Great addition to any bike repair arsenal.

Features
- High Shear Strength
- Controlled flow
- High peel strength
- 60 minute worklife
- Outstanding environmental performance
- Easy mixing. 

This adhesive has controlled flow, a 2:1 mix ratio, a 60-80 minute work life, and develops handling strength in 1-2 hours. Packaged in convenient Duo-Pak cartridges designed for use with the 3M EPX Plus II Applicator.
Directions for Use:
Important: Use only the specified 3M™ EPX™ Plus II Applicator system. 
1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants. 
2) Place duo-pak cartridge in EPX applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only 2:1 mixing nozzle by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.

3M ID: 62359314366

Note:
-**DP 460 Adhesive requires 3M EPX Plus II Applicator for proper use
and a 2:1 mixing nozzle.**