Skip to content
3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue, 490ml
3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue, 490ml

3M Scotch-Weld Structural Plastic Adhesive DP8010 Blue, 490ml

by 3M
Save 22%
$489.00
$379.00
3M Scotch-Weld Structural Plastic Adhesive DP8010, 490ml Blue 
 
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 is a two part acrylic-based adhesive that provide high quality bonding performance on low surface energy plastics, including polypropylene, Polyethylene, and thermoplastic olefins without special surface treatment.

Features:
-Structural bonds polyolefins without surface treatment
-Medium viscosity
-3 minute work life.
-Good for gluing, bonding, joining, attaching, assembling, encapsulating, potting, and sealing.

Product ID: 62286336300
UPC#: 00051115716010 
3M Product Number: 8010

Directions for Use:
Important: Use only the specified 3M™ EPX™ Manual Applicator

1) Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants. 
2) Place 490ml duo-pak cartridge in EPX Manual Applicator 490ml applicator. Remove cap. Dispense and discard a small amount of adhesive to assure even ratio and free flow. Clear orifice if necessary. Use only Helical nozzle orange 10:1 mixing nozzle by: (a) aligning nozzle notch with cartridge recess, and (b) twisting into place. Dispense and discard a small amount of adhesive through nozzle until the adhesive is mixed.

* Note: DP8010 NS Blue 490ml Adhesive require 3M EPX Manual 490ml Applicator, and EPX 490ml Mixing Nozzle Helical Nozzle (Red) for proper use *