Skip to content

3M Scotch-Weld Acrylic Adhesive DP8810NS, Green, 45ml tube

by 3M
Save 19%
Original price $35.90
Current price $28.90
3M Scotch-Weld Acrylic Adhesive DP8810NS, Green, 45ml tube
 
3M DP8810NS offers a longer working time than it's counterpart DP8805NS. 3M DP8810NS acrylic adhesive does not require refrigeration; this innovative adhesive boost a 18 month shelf life beating out its competition. Easily control your bond line thickness due to the glass beads in DP8810NS.

Features:
  • Low Odor
  • Fast Rate of Strength Build
  • Longer Shelf Life - 18 Months Without Refrigeration
  • Glass Beads Control Bond Thickness
  • Color Dyed Accelerator
  • Non-flammable
  • Fast Curing
  • Work life: 8-12 minutes
  • Structural strength: 19-23 minutes
 
Directions for Use:
1. Store cartridges with cap end up to allow any air bubbles to rise towards the tip. To use, simply insert the cartridge into the EPX applicator and start the plunger into the cylinders using light pressure on the trigger. Then remove the cap and expel a small amount of adhesive to ensure material flows freely from both sides of cartridge. Attach an EPX 10:1 45ml mixing nozzle to the cartridge and begin dispensing the adhesive. 
2. Apply adhesive to clean, dry substrates, which are free of paint, oxide films, oils, dust, mold release agents and all other surface contaminants. 
3. Allow adhesvie to cures at 16 celsius until completely firm. Applying heat up to 66 degrees celsius will increase cure speed.
4. Keep parts from moving during cure. Apply contact pressure or fixture in place inf necessary.
5. Excess uncured adhesive can be cleaned up with keotone-type solvents.



** Note: DP-8810NS Adhesive requires 3M EPX Plus II Applicator, 3M EPX Plus II 10:1 Plunger and 10:1 45ml Mixing nozzle for proper use **